China Manufactrer Wholesale Good Quality Lm80uu Lm100uu Linear Bearing and Rails Aj/Op Type for Lm Shaft

• Customization: Available
• Standard or Nonstandard: Standard
• Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery
• Model NO.: LM80UU LM100UU
• Surface Treatment: Polishing
• Material: Gcr15
• Transport Package: Single Box +Wooden Box
• Specification: LM80UU LM100UU
• Origin: China
• Production Capacity: 20000000

Product Description

 

Product Description

We have been engaged in the production and export of bearings and linear transmission products for 20 years, accumulating a lot of technical experience in this field. Our products are not only popular in China, but also exported to many countries and regions around the world all year round. Because we are a factory, we have an advantage in price for the same quality. And can promptly answer various bearing and linear transmission related questions for customers.

Linear bearings are a low-cost linear motion system that is used in conjunction with cylindrical linear guides. Due to the contact between the bearing ball and the outer sleeve of the bearing, the steel ball rolls with minimal frictional resistance. Therefore, linear bearings have low friction, are relatively stable, and do not change with the bearing speed. They can achieve stable linear motion with high sensitivity and accuracy. The consumption of linear bearings also has its limitations, mainly due to the poor impact load capacity and load-bearing capacity of the bearings. Secondly, linear bearings experience significant vibration and noise during high-speed motion.

In addition to the commonly used metal linear bearings, there are also plastic linear bearings. Plastic linear bearings are a self-lubricating linear motion system, and their biggest difference from metal linear bearings is that metal linear bearings have rolling friction and point contact with cylindrical shafts, making them suitable for low load high-speed motion; Plastic linear bearings have sliding friction and are in surface contact with cylindrical shafts, making them suitable for high load and low-speed motion.


 

Designation					Major Dimensions and Tolerance
LM..UU	Ball circuit	Weight(g)	LM...AJ	LM...OP	Baii circuit	Tolerance(mm)
						Precisio J	Precisio P
LM4UU	4	1.9			4	0-0.005	0-0.008
LM5UU	4	4			5
LM6UU	4	8	LM6-AJ		6	0-0.006	0-0.009
LM8UU	4	11	LM8-AJ		8
LM8UU	4	16	LM8-AJ		8
LM10UU	4	30	LM10-AJ	LM10-0P	10
LM12UU	4	31.5	LM12-AJ	LM12-0P	12
LM13UU	5	43	LM13-AJ	LM13-0P	13
LM16UU	5	69	LM16-AJ	LM16-0P	16
LM20UU	5	87	LM20-AJ	LM20-0P	20	0-0.007	0-0.0010
LM25UU	6	220	LM25-AJ	LM25-0P	25
LM30UU	6	250	LM30-AJ	LM30-0P	30
LM35UU	6	390	LM35-AJ	LM35-0P	35	0-0.008	0-0.0012
LM40UU	6	585	LM40-AJ	LM40-0P	40
LM50UU	6	1580	LM50-AJ	LM50-0P	50
LM60UU	6	2000	LM60-AJ	LM60-0P	60	0-0.009	0-0.0015
LM80UU	6	4420	LM80-AJ	LM80-0P	80
LM100UU	6	8600	LM100-AJ	LM100-0P	100	0-0.010	0-0.020

 

Designation					Major Dimensions and Tolerance
LME..UU	Ball circuit	Weight(g)	LME...AJ	LME...OP	Baii circuit	Tolerance(mm)
						Precisio J	Precisio P
LME4UU	4	1.9			4		0.008
LME5UU	4	11	LME5-AJ		5
LME8UU	4	20	LME8-AJ		8
LME10UU	4	29.5	LME10-AJ	LME10-0P	10
LME12UU	5	41	LME12-AJ	LME12-0P	12
LME16UU	5	57	LME16-AJ	LME16-0P	16		+0.009 -0.001
LME20UU	6	91	LME20-AJ	LME20-0P	20
LME25UU	6	215	LME25-AJ	LME25-0P	25		+0.011 -0.001
LME30UU	6	325	LME30-AJ	LME30-0P	30
LME40UU	6	705	LME40-AJ	LME40-0P	40		+0.013 -0.002
LME50UU	6	1130	LME50-AJ	LME50-0P	50
LME60UU	6	2050	LME60-AJ	LME60-0P	60
LME80UU	6	5140	LME80-AJ	LME80-0P	80

Classification of Linear Bearings
(1) Standard type, gap adjustment type linear bearing, open type linear bearing, extended type linear bearing, universal type linear bearing
(2) Flange type linear bearings can be divided into: circular flange type, flange type, elliptical flange type, guide circular flange type, guide flange type, guide elliptical flange type, and extended circular flange type.


It is divided into two major series according to specifications, namely LM and LME series Its code name LM series is used in Asia, Southeast Asian countries, Japan, South Korea, China, etc. Based on metric dimensions, the outer diameter tolerance of the straight axis used is generally H7. The LME series is mostly used in Europe, the United States, Germany, Italy and other regions. Based on imperial dimensions, there are also metric dimensions, and the outer diameter tolerance of the straight axis used is generally g6. The structural characteristics of the two series are roughly the same, except for differences in size and aperture tolerances.


Divided by shape:
1. Straight tube type (shaped like a cylinder, usually installed with snap springs, used for installing smaller sizes)
2. Flange type (with installation flanges at the ends or in the middle, which can be installed with screws. Flanges are generally divided into three types: circular, square, and chamfered)
3. Open type (shaped like a straight cylinder with axial cut on the surface, used in situations where clearance adjustment is required, divided into two types: large opening and small opening)
By performance:
1. Ordinary type (for general performance requirements)
2. Super type (for situations requiring long lifespan and high load performance)
 

 

Detailed Photos

     

 

Raw materials and Testing

 

Packaging & Shipping

 

Our Advantages

Price competitiveness: As factories we can achieve significant price advantages through large-scale production and direct control of production costs. 

Direct production control: The factory has comprehensive control over the production process, from raw material procurement to final products, all under its control. This not only ensures product quality and meets specific customer needs, but also significantly improves delivery timeliness.

 We not only have the ability to produce high-quality products, but also meet your various customization needs. We have always put your needs first and are dedicated to serving you.

 

FAQ

1.Q :What are you factory or trading company?

A:We are intergrated industry and trade.
    In order to conduct international business and serve global customers more professionally and efficiently, we established an            import and export company in Jinan in 2022: Shandong Beiyang International Trade Co., Ltd. This company is a subsidiary of          Liaocheng Gaoyin Bearing Co., Ltd. (SFC Factory). and all its import and export business revolves around the SFC factory.

2,Q:What's your after-sales service and warranty?

A: We promise to bear the following responsibilities when defective products were found:
1. Replacements would be sent with goods of your next order;
2. We can provide monetary compensation for defective products that have been not been used yet.

3.Q:Do you accept ODM&OEM orders?
A:Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

4.Q:What's the MOQ?
A:According to customer specific inquiry,MOQ can adjust.It's flexible.

5.Q:How long is the lead time?
A:Produce one container products need about 10-15 days.

6.Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users.

7.Q:How to place order?
A: 1. Email us the model number, brand ,quality precision and quantity,shipping way of bearings and we will quote best price for               you; 
    2. Proforma Invoice made and sent to you as the price agreed by both parts; 
    3. Deposit Payment after confirming the PI and we arrange production; 
    4. Balance paid before shipment or after copy of Bill of Loading.

Application field

 
Linear bearings are increasingly being used in precision equipment or special machinery industries such as electronic devices, food machinery, packaging machinery, medical machinery, printing machinery, textile machinery, machinery, instruments, robots, tool machinery, CNC machine tools, automobiles, and digital 3D coordinate measuring equipment.