| Customization: | Available |
|---|---|
| Rolling Body: | Roller Bearings |
| The Number of Rows: | Single |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Cylindrical roller bearing is a radial rolling bearing with cylindrical rollers as the rolling element. Its internal structure adopts rollers arranged in parallel, with spacers or isolation blocks installed between the rollers to prevent tilting or mutual friction, effectively preventing an increase in rotational torque. The rollers of cylindrical roller bearings are in linear contact with the raceway, with high load capacity, mainly bearing radial loads, and suitable for high-speed rotation.
Cylindrical roller bearings have the following characteristics:
Large radial bearing capacity: suitable for withstanding heavy loads and impact loads.
Low friction coefficient: suitable for high-speed rotation, with a maximum speed close to deep groove ball bearings.
The inner or outer ring can be separated: easy to install and remove.
| Items Number | Dimensions | Basic Rated Load | Fatigue Ultimate Load | Rated Speed | Limited Speed | Weight | |||
| d | D | B | Dynamic/kN | Static/kN | kN | r/min | r/min | kg | |
| NU202ECP | 15 | 35 | 11 | 12.5 | 10.2 | 1.22 | 22000 | 26000 | 0.047 |
| NJ202ECP | 35 | 11 | 12.5 | 10.2 | 1.22 | 22000 | 26000 | 0.048 | |
| N203ECP | 17 | 40 | 12 | 20 | 14.3 | 1.73 | 20000 | 22000 | 0.066 |
| NU203ECP | 40 | 12 | 20 | 14.3 | 1.73 | 20000 | 22000 | 0.068 | |
| NJ203ECP | 40 | 12 | 20 | 14.3 | 1.73 | 20000 | 22000 | 0.069 | |
| NUP203ECP | 17 | 40 | 12 | 20 | 14.3 | 1.73 | 20000 | 22000 | 0.072 |
| NU2203ECP | 40 | 16 | 27.5 | 21.6 | 2.65 | 20000 | 22000 | 0.087 | |
| NJ2203ECP | 40 | 16 | 27.5 | 21.6 | 2.65 | 20000 | 22000 | 0.093 | |
| NUP2203ECP | 17 | 40 | 16 | 27.5 | 21.6 | 2.65 | 20000 | 20000 | 0.097 |
| N303ECP | 47 | 14 | 28.5 | 20.4 | 2.55 | 17000 | 20000 | 0.12 | |
| NJ303ECP | 47 | 14 | 28.5 | 20.4 | 2.55 | 17000 | 20000 | 0.12 | |
| NU303ECP | 17 | 47 | 14 | 28.5 | 20.4 | 2.55 | 17000 | 20000 | 0.12 |
| N204ECP | 20 | 47 | 14 | 28.5 | 22 | 2.75 | 17000 | 19000 | 0.11 |
| NJ204ECP | 47 | 14 | 28.5 | 22 | 2.75 | 17000 | 19000 | 0.11 | |
| NU204ECP | 47 | 14 | 28.5 | 22 | 2.75 | 17000 | 19000 | 0.11 | |
| NUP204ECP | 20 | 47 | 14 | 28.5 | 22 | 2.75 | 17000 | 19000 | 0.12 |
| NJ2204ECP | 47 | 18 | 34.5 | 27.5 | 3.45 | 17000 | 19000 | 0.14 | |
| NU2204ECP | 47 | 18 | 34.5 | 27.5 | 3.45 | 17000 | 19000 | 0.14 | |
| NU304ECP | 20 | 52 | 15 | 35.5 | 26 | 3.25 | 15000 | 18000 | 0.14 |
| N304ECP | 52 | 15 | 35.5 | 26 | 3.25 | 15000 | 18000 | 0.15 | |
| NJ304ECP | 52 | 15 | 35.5 | 26 | 3.25 | 15000 | 18000 | 0.15 | |
| NUP304ECP | 20 | 52 | 15 | 35.5 | 26 | 3.25 | 15000 | 18000 | 0.16 |
| NU2304ECP | 52 | 21 | 47.5 | 38 | 4.8 | 15000 | 18000 | 0.21 | |
| NJ2304ECP | 52 | 21 | 47.5 | 38 | 4.8 | 15000 | 18000 | 0.22 | |
| NUP2304ECP | 20 | 52 | 21 | 47.5 | 38 | 4.8 | 15000 | 18000 | 0.22 |
| NU1005 | 25 | 47 | 12 | 14.2 | 13.2 | 1.4 | 18000 | 18000 | 0.082 |
| N205ECP | 52 | 15 | 32.5 | 27 | 3.35 | 15000 | 16000 | 0.13 | |
| NU205ECP | 52 | 15 | 32.5 | 27 | 3.35 | 15000 | 16000 | 0.13 | |
| NJ205ECP | 25 | 52 | 15 | 32.5 | 27 | 3.35 | 15000 | 16000 | 0.14 |
| NUP205ECP | 52 | 15 | 32.5 | 27 | 3.35 | 15000 | 16000 | 0.14 | |
| NU2205ECP | 52 | 18 | 39 | 34 | 4.25 | 15000 | 16000 | 0.16 | |
| NJ2205ECP | 25 | 52 | 18 | 39 | 34 | 4.25 | 15000 | 16000 | 0.17 |
| NUP2205ECP | 52 | 18 | 39 | 34 | 4.25 | 15000 | 16000 | 0.17 | |
| N305ECP | 62 | 17 | 46.5 | 36.5 | 4.55 | 12000 | 15000 | 0.23 | |
The application fields of cylindrical roller bearings are very wide, including but not limited to:
Large and medium-sized electric motors, locomotives, machine tool spindles, internal combustion engines, generators, gas turbines, gearboxes, rolling mills, vibrating screens, and lifting and transportation machinery.
Disassemble OF cylindrical Roller Bearing
The disassembly of bearings is a regular maintenance and is carried out during bearing replacement. After disassembly, if it is necessary to continue using or to check the condition of the bearings, the disassembly should be carried out with the same care as during installation. Be careful not to damage the various parts of the bearing, especially the disassembly of interference fit bearings, which is difficult to operate.
It is also very important to design and manufacture disassembly tools as needed. When disassembling, study the disassembly method, sequence, and investigate the fitting conditions of the bearings according to the drawings to ensure that the disassembly operation is foolproof.
The disassembly of the outer ring with interference fit requires setting several outer ring compression screws on the circumference of the shell in advance, tightening the screws evenly while disassembling. These screw holes are usually covered with blind plugs, tapered roller bearings, and other separable bearings. Several cuts are made on the shoulder of the housing cover, and they can be disassembled using pads, a press, or gently tapped.
The disassembly of the inner ring can be easily done by pulling it out with a press. At this point, it is important to ensure that the inner ring bears its pulling force. Furthermore, the illustrated pull-out card holder is often used, and regardless of the type of card holder, it must be firmly attached to the inner ring side. For this, it is necessary to consider the size of the shaft shoulder or study the machining of grooves at the shoulder for the use of drawing fixtures.
The inner ring of large bearings is disassembled using hydraulic pressure method. By setting oil pressure in the oil hole of the bearing, it is easy to pull out. Bearings with a large width can be disassembled using both hydraulic pressure and drawing tools.
The inner ring of cylindrical roller bearings can be disassembled using induction heating method. The method of heating the local area in a short period of time to expand the inner ring and then pulling it out. In situations where a large number of such bearing inner rings need to be installed, induction heating method is also used.
SFC factory was established in 2003, mainly producing middle and high quality automobile bearing,tapered roller bearings, deep groove ball bearings, pillow block ball bearings,. We have nearly 20 years of experience in bearing production and processing, research and development, and advanced production technology. The bearings we produce have stable quality, high speed and long service life. They are widely used in agricultural machinery, food machinery, packaging machinery, motors, motorcycles, automobiles and other industries.
Our products are sold all over the country and exported to Russia, Mexico, Italy, Brazil, Southeast Asia, India and the Middle East, of which 60% are our own brand "TBAI" "SFC" and 40% are OEM authorized by our customers. production.
Our company has established a strong relationship with our customers for high quality, high efficiency, high cost performance and high satisfaction! Our goal is to continuously innovate and strive to become the best supplier in the field of bearings worldwide.
EXHIBITION SHOW
Price competitiveness: As factories we can achieve significant price advantages through large-scale production and direct control of production costs.
Direct production control: The factory has comprehensive control over the production process, from raw material procurement to final products, all under its control. This not only ensures product quality and meets specific customer needs, but also significantly improves delivery timeliness.
As a factory with more than 20 years of experience, we not only have the ability to produce high-quality products, but also meet your various customization needs. We have always put your needs first and are dedicated to serving you.
If you are finding tapered roller bearings,and others bearings,kindly contact our sales manager.Here are some common questions.If you also have any other questions,please feel free to contact us.
1.Q :What are you factory or trading company?
A:We are factory.But in order to conduct international business and serve global customers more professionally and efficiently, we established an import and export company in Jinan in 2022: Shandong Beiyang International Trade Co., Ltd. This company is a subsidiary of Liaocheng Gaoyin Bearing Co., Ltd. (factory), and all its import and export business revolves around the factory.
2.Q:What's your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1. Replacements would be sent with goods of your next order;
2. We can provide monetary compensation for defective products that have been not been used yet.
3.Q:Do you accept ODM&OEM orders?
A:Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.
4.Q:What's the MOQ?
A:According to customer specific inquiry,MOQ can adjust.It's flexible.
5.Q:How long is the lead time?
A:Produce one container products need about 10-15 days.
6.Q:Do you offer free samples?
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users.
7.Q:How to place order?
A: 1. Email us the model number, brand ,quality precision and quantity,shipping way of bearings and we will quote best price for you;
2. Proforma Invoice made and sent to you as the price agreed by both parts;
3. Deposit Payment after confirming the PI and we arrange production;
4. Balance paid before shipment or after copy of Bill of Loading.
){kind=link}