Roller Bearing Cylindrical Roller Bearing Nj205ecp Nj2205ecp Nj305ecp Nj2305ecp

• Customization: Available
• Rolling Body: Roller Bearings
• The Number of Rows: Single
• Model NO.: NJ205ECP NJ2205ECP NJ305ECP NJ2305ECP
• Outer Dimension: Small (28-55mm)
• Material: Gcr15
• Spherical: Non-Aligning Bearings
• Load Direction: Radial Bearing
• Separated: Separated
• Roller: Super Finishing Roller
• Item Number: Nj205ecp Nj2205ecp Nj305ecp Nj2305ecp
• Type of Shipping: Sea/Air/Land
• Packaging: Industrial Packaging/ Pallet
• Weight: 0.14kg 0.17kg 0.24kg 0.35kg
• Inner: 25mm
• Outer: 52mm
• Thickness: 15mm
• Dynamic Load: 32.5kN 39kN 46.5kN 64kN
• Static Load: 27kN 34kN 36.5kN 55kN
• Transport Package: Carton or Pallet
• Specification: 25*52*15mm
• Trademark: SFC or OEM
• Origin: China
• HS Code: 8482200000
• Production Capacity: 10000000pieces/Year

Product Description

Product Description

Cylindrical roller bearing is a radial rolling bearing with cylindrical rollers as the rolling element. Its internal structure adopts rollers arranged in parallel, with spacers or isolation blocks installed between the rollers to prevent tilting or mutual friction, effectively preventing an increase in rotational torque. The rollers of cylindrical roller bearings are in linear contact with the raceway, with high load capacity, mainly bearing radial loads, and suitable for high-speed rotation.


Cylindrical roller bearings have the following characteristics:

Large radial bearing capacity: suitable for withstanding heavy loads and impact loads.

Low friction coefficient: suitable for high-speed rotation, with a maximum speed close to deep groove ball bearings.

The inner or outer ring can be separated: easy to install and remove.

 

Items Number	Dimensions			Basic Rated Load		Fatigue Ultimate Load	Rated Speed	Limited Speed	Weight
	d	D	B	Dynamic/kN	Static/kN	kN	r/min	r/min	kg
NU202ECP	15	35	11	12.5	10.2	1.22	22000	26000	0.047
NJ202ECP		35	11	12.5	10.2	1.22	22000	26000	0.048
N203ECP	17	40	12	20	14.3	1.73	20000	22000	0.066
NU203ECP		40	12	20	14.3	1.73	20000	22000	0.068
NJ203ECP		40	12	20	14.3	1.73	20000	22000	0.069
NUP203ECP	17	40	12	20	14.3	1.73	20000	22000	0.072
NU2203ECP		40	16	27.5	21.6	2.65	20000	22000	0.087
NJ2203ECP		40	16	27.5	21.6	2.65	20000	22000	0.093
NUP2203ECP	17	40	16	27.5	21.6	2.65	20000	20000	0.097
N303ECP		47	14	28.5	20.4	2.55	17000	20000	0.12
NJ303ECP		47	14	28.5	20.4	2.55	17000	20000	0.12
NU303ECP	17	47	14	28.5	20.4	2.55	17000	20000	0.12
N204ECP	20	47	14	28.5	22	2.75	17000	19000	0.11
NJ204ECP		47	14	28.5	22	2.75	17000	19000	0.11
NU204ECP		47	14	28.5	22	2.75	17000	19000	0.11
NUP204ECP	20	47	14	28.5	22	2.75	17000	19000	0.12
NJ2204ECP		47	18	34.5	27.5	3.45	17000	19000	0.14
NU2204ECP		47	18	34.5	27.5	3.45	17000	19000	0.14
NU304ECP	20	52	15	35.5	26	3.25	15000	18000	0.14
N304ECP		52	15	35.5	26	3.25	15000	18000	0.15
NJ304ECP		52	15	35.5	26	3.25	15000	18000	0.15
NUP304ECP	20	52	15	35.5	26	3.25	15000	18000	0.16
NU2304ECP		52	21	47.5	38	4.8	15000	18000	0.21
NJ2304ECP		52	21	47.5	38	4.8	15000	18000	0.22
NUP2304ECP	20	52	21	47.5	38	4.8	15000	18000	0.22
NU1005	25	47	12	14.2	13.2	1.4	18000	18000	0.082
N205ECP		52	15	32.5	27	3.35	15000	16000	0.13
NU205ECP		52	15	32.5	27	3.35	15000	16000	0.13
NJ205ECP	25	52	15	32.5	27	3.35	15000	16000	0.14
NUP205ECP		52	15	32.5	27	3.35	15000	16000	0.14
NU2205ECP		52	18	39	34	4.25	15000	16000	0.16
NJ2205ECP	25	52	18	39	34	4.25	15000	16000	0.17
NUP2205ECP		52	18	39	34	4.25	15000	16000	0.17
N305ECP		62	17	46.5	36.5	4.55	12000	15000	0.23
NU305ECP	25	62	17	46.5	36.5	4.55	12000	15000	0.23
NJ305ECP		62	17	46.5	36.5	4.55	12000	15000	0.24
NUP305ECP		62	17	46.5	36.5	4.55	12000	15000	0.25
NU2305ECP	25	62	24	64	55	6.95	12000	15000	0.34
NJ2305ECP		62	24	64	55	6.95	12000	15000	0.35
NUP2305ECP		62	24	64	55	6.95	12000	15000	0.36

 

Detailed Photos

Cylindrical roller bearings can be classified into various types based on whether the ring has a retaining edge or not:


NU type: The outer ring has a blocking edge, while the inner ring has no blocking edge, suitable for high-speed rotation and large radial loads.

NJ type: outer double edge, inner single edge, suitable for one-way axial positioning.

NF type: outer ring with single gear edge, inner ring with double gear edge, suitable for one-way axial positioning.

NUP type: outer ring with dual gear edges, inner ring with gear edge on one side and retaining ring on the other side, suitable for bidirectional axial positioning.
 

 

Packaging & Shipping

We can do our brands,OEM orders,can according to customer requirements to customized.About MOQ,kindly contact our sales manager.
 

Industrial Packaging
(Tube)

 

Single Box

 

Pallet

 

 

Application

The application fields of cylindrical roller bearings are very wide, including but not limited to:

Large and medium-sized electric motors, locomotives, machine tool spindles, internal combustion engines, generators, gas turbines, gearboxes, rolling mills, vibrating screens, and lifting and transportation machinery.

 

 

Maintenance

 

Disassemble OF cylindrical Roller Bearing

The disassembly of bearings is a regular maintenance and is carried out during bearing replacement. After disassembly, if it is necessary to continue using or to check the condition of the bearings, the disassembly should be carried out with the same care as during installation. Be careful not to damage the various parts of the bearing, especially the disassembly of interference fit bearings, which is difficult to operate.

It is also very important to design and manufacture disassembly tools as needed. When disassembling, study the disassembly method, sequence, and investigate the fitting conditions of the bearings according to the drawings to ensure that the disassembly operation is foolproof.

The disassembly of the outer ring with interference fit requires setting several outer ring compression screws on the circumference of the shell in advance, tightening the screws evenly while disassembling. These screw holes are usually covered with blind plugs, tapered roller bearings, and other separable bearings. Several cuts are made on the shoulder of the housing cover, and they can be disassembled using pads, a press, or gently tapped.

The disassembly of the inner ring can be easily done by pulling it out with a press. At this point, it is important to ensure that the inner ring bears its pulling force. Furthermore, the illustrated pull-out card holder is often used, and regardless of the type of card holder, it must be firmly attached to the inner ring side. For this, it is necessary to consider the size of the shaft shoulder or study the machining of grooves at the shoulder for the use of drawing fixtures.

The inner ring of large bearings is disassembled using hydraulic pressure method. By setting oil pressure in the oil hole of the bearing, it is easy to pull out. Bearings with a large width can be disassembled using both hydraulic pressure and drawing tools.

The inner ring of cylindrical roller bearings can be disassembled using induction heating method. The method of heating the local area in a short period of time to expand the inner ring and then pulling it out. In situations where a large number of such bearing inner rings need to be installed, induction heating method is also used.

 

Company Profile

SFC factory was established in 2003, mainly producing middle and high quality automobile bearing,tapered roller bearings, deep groove ball bearings, pillow block ball bearings,. We have nearly 20 years of experience in bearing production and processing, research and development, and advanced production technology. The bearings we produce have stable quality, high speed and long service life. They are widely used in agricultural machinery, food machinery, packaging machinery, motors, motorcycles, automobiles and other industries.

Our products are sold all over the country and exported to Russia, Mexico, Italy, Brazil, Southeast Asia, India and the Middle East, of which 60% are our own brand "TBAI" "SFC" and 40% are OEM authorized by our customers. production.

Our company has established a strong relationship with our customers for high quality, high efficiency, high cost performance and high satisfaction! Our goal is to continuously innovate and strive to become the best supplier in the field of bearings worldwide.

 

 

EXHIBITION SHOW

 

 

Our Advantages

Price competitiveness: As factories we can achieve significant price advantages through large-scale production and direct control of production costs. 

Direct production control: The factory has comprehensive control over the production process, from raw material procurement to final products, all under its control. This not only ensures product quality and meets specific customer needs, but also significantly improves delivery timeliness.

As a factory with more than 20 years of experience, we not only have the ability to produce high-quality products, but also meet your various customization needs. We have always put your needs first and are dedicated to serving you.

 

                               Accessories Supplier                                                                        Testing  Equipment                                                              
 

 

FAQ

If you are finding tapered roller bearings,and others bearings,kindly contact our sales manager.Here are some common questions.If you also have any other questions,please feel free to contact us.

1.Q :What are you factory or trading company?
A:We are factory.But in order to conduct international business and serve global customers more professionally and efficiently, we established an import and export company in Jinan in 2022: Shandong Beiyang International Trade Co., Ltd. This company is a subsidiary of Liaocheng Gaoyin Bearing Co., Ltd. (factory), and all its import and export business revolves around the factory.

2.Q:What's your after-sales service and warranty?

A: We promise to bear the following responsibilities when defective products were found:
1. Replacements would be sent with goods of your next order;
2. We can provide monetary compensation for defective products that have been not been used yet.

3.Q:Do you accept ODM&OEM orders?
A:Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

4.Q:What's the MOQ?
A:According to customer specific inquiry,MOQ can adjust.It's flexible.

5.Q:How long is the lead time?
A:Produce one container products need about 10-15 days.

6.Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users.

7.Q:How to place order?
A: 1. Email us the model number, brand ,quality precision and quantity,shipping way of bearings and we will quote best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.